HP ProLiant SL165s G7 Software Configuration Manual page 31

To set a Supervisor password:
Indicates whether a supervisor password has been set, if the password has been installed,
1.
installed displays, if not, not installed displays.
In the Security menu screen, in the Change Supervisor Password field, press Enter.
1.
The Enter New Password window displays.
Figure 26 Enter New Password
Type a new password in the Enter New Password box. The password may consist of up to six
2.
alphanumeric characters (A-Z, a-z, 0-9), then press Enter. The Confirm New Password window
displays.
Type the same password in the Confirm New Password box to verify the first entry, and then
3.
press Enter. The Password Installed OK is displayed. Press OK to finish.
Press F10 to save the password and close the Setup Utility.
4.
Setup automatically changes the supervisor Password.
To change the supervisor password:
In the Security menu screen, in the Change Supervisor Password field, press Enter. The Enter
1.
New Password window displays. Type a new password in the Enter New Password box.
Type the same password in the Confirm New Password box to verify the first entry, then press
2.
Enter, the Password Installed OK windows display, press Enter to finish.
To clear the supervisor password:
In the Security menu screen, in the Change Supervisor Password field, press Enter. The Enter
1.
New Password window displays. Directly press Enter button.
NOTE: Refer to above procedures to set/change/clear the User password.
System BIOS configuration 31