[Network Settings] - Sony UBP-X800 Operating Instructions Manual

Ultra hd blu-ray/dvd player
Hide thumbs Also See for UBP-X800:
Table of Contents

Advertisement

x [HDMI Audio Output]
[Auto]: Outputs audio signal via HDMI OUT 2
jack if it is connected to a device and the
device is turned on. Otherwise, outputs audio
signal via HDMI OUT 1 jack.
[HDMI1]: Outputs audio signal via HDMI OUT 1
jack.
[HDMI2]: Outputs audio signal via HDMI OUT
2 jack.
x [Quick Start Mode]
[On]: Shortens the startup time when turning
on the player.
[Off]: Reduces standby power consumption.
x [Auto Display]
[On]: Automatically displays information on
the screen when changing the viewing titles,
picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x [Software Update Notification]
[On]: Sets the player to inform you of newer
software version information (page 20).
[Off]: Turns off the function.
x [Gracenote Settings]
[Auto]: Automatically downloads audio CD
(CD-DA) disc information before audio CD
(CD-DA) disc playback after audio CD (CD-DA)
disc recognition. Connect to the network for
downloading.
[Manual]: Downloads the disc information
when [Music Search] is selected.
x [Device Name]
Displays the player's name. The player's
name can be changed.
x [System Information]
Displays the player's software version
information and the MAC address.
x [Software License Information]
Displays information about the Software
License.

[Network Settings]

x [Internet Settings]
Connect the player to the network
beforehand. For details, see "Step 2: Network
Connection" (page 13).
[Wired Setup]: Select this when you connect
to a broadband router using a LAN cable.
[Wireless Setup]: Select this when you use
the wireless LAN that is built into the player
for wireless network connection.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
x [Network Connection Status]
Displays the current network status.
x [Network Connection Diagnostics]
Checks for the proper network connection by
running the network diagnostics.
x [Screen mirroring RF Setting]
[Auto]: Sets the RF (Radio Frequency) channel
band automatically for Screen mirroring
connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/CH 6/CH 11 as
priority.
x [Connection Server Settings]
Sets whether or not to display the connected
server.
x [Auto Home Network Access Permission]
[On]: Allows automatic access from newly
detected Home Network controller-
compatible product.
[Off]: Turns off the function.
x [Home Network Access Control]
Displays a list of Home Network controller-
compatible products and sets whether or not
to accept commands from the controllers in
the list.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
x [Remote Start]
[On]: Allows you to turn on the player by a
device linked via a network.
[Off]: Turns off the function.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ubp-ux80

Table of Contents