Zenith Z-150 User Manual page 117

Page
3.34
Operations
Press the RETURN key. The disk access indicators alternately glow
•
as each disk drive is accessed by the operating system. The name
of each file will be displayed as it is copied from drive A to drive
B. When all files have been copied, a message is displayed that
tells you how many files were transferred (copied) to the destination
disk (in this case, all of them). Such a message might read:
26 File (s) copied
Nonsystem Disks
To prepare a disk that does not contain the operating system, the procedure
is slightly different.
FORMAT
• Place your MS-DOS disk in drive A.
Type:
•
FORMAT B:
Iv
• Press the RETURN key. The disk will not have the operating system
placed on it for the FORMAT procedure, but it will be checked
for bad sectors. Your computer will display:
FORMAT version 2.00
Copyright
(e)
1984, Zenith Data Systems Corporation
Insert new disk in drive B
and press RETURN when ready.
• Insert a blank disk in drive 8 and close the door or latch.
• Press the RETURN key. Drive 8's disk access indicator will glow,
and the drive will make some clicking sounds as the disk is format­
ted. After aooroximatelv one min e the c m ter will i I .