Self-Diagnosis Function And Service Modes; Service Mode Table; Dvd Self Diagnostic Function-Error Code - Panasonic DVD-CP72P Service Manual

DVD-CP72P

8 Self-Diagnosis Function and Service Modes

8.1.

Service Mode Table 1

The service modes can be activated by pressing various button combination on the player and remote control unit.
Player buttons Remote control unit buttons
PAUSE
+
OPEN/CLOSE
PAUSE
SKIP/SEARCH<<
OPEN/CLOSE
8.2.

DVD Self Diagnostic Function-Error Code

Error Code Error Content
U, H error
U11 Focus error
H01 Tray loading error
H02 Spindle servo error
H03 Traverse servo error
H04 Tracking servo error
H05 Seek error
H06 Power error
H07 Spindle
error
DSC related
F500 DSC error
F501 DSC not Ready
F502 DSC Time out error
F503 DSC communication
Failure
F505 DSC Attention error
F506 Invalid media
ODC related
F600 Access
management
information caused by
demodulation error
F601 Indeterminate sector ID
requested
F602 Access failure to LEAD-
IN caused
demodulation error
F603 Access
KEYDET
demodulation error
0 Displaying the UHF display F_ _ _
5 Jitter check, tilt adjustment
*Display shows J_xxx_yyy_zz
"yyy" and "zz" shown to the right have nothing to do with the jitter
value. "yyy" is the error counter, while "zz" is the focusdrive
value.
Referto section 11.4. for Optical Pickup Tilt Adjustment
Procedure.
6 Checking the region numbers and broadcast system
7 Checking the program version
9 Lighting Confirmation Function of Display Tube
DISPLAY Checking the laser drive current
PAUSE Writing the laser drive current value after replacing the optical
pickup (do not use for anything other than optical pickup
replacement)
Initializing the DVD player
(restoring factory preset settings)
Additional error explanation
(Spindle servo, DSC (IC2001) SP motor, CLV
servo error)
Cannot switch off the power because of the panel
and system computer communication error
motor drive
DSC (IC2001) stops in the occurence of servo
error (starup, focus error, etc)
DSC-system computer
(Communication failure caused by idling of DSC)
Similar disposal as F500
Communication
although communication command was sent)
Similar disposal as F500
Disc is flipped
incompatible disc
failure to Operation stopped because navigation data is not
accessible caused by the demodulation defect
Operation stopped caused by the request to
access abnormal ID data
LEAD IN data unreadable
by
failure to Access failure to CSS data of disc
caused by
Application
communication error
error (result error occured
over, TOC unreadable,
8
Refer to section 8.2. Self-
Diagnosis Function (UHF
Display).
Refer to section 11.4.
Optical Pickup Tilt
Adjustment
Check the IC6301 FLASH
ROM program.
Refer to section 10
Optical Pickup
Replacement Procedure.
Refer to section 9.4.
Initializing the DVD
player.
Defect 1 Defect 2 Defect 3
Optical ADSC FEP
pickup (IC2001) (IC5201)
ADSC CPU
(IC2001) (IC6201)
Optical ADSC FEP
pickup (IC2001) (IC5201)
ADSC FEP EEPROM
(IC2001) (IC5201) (IC6221)
Optical ADSC FEP
pickup (IC2001) (IC5201)
DISC FEP ADSC
(IC5201) (IC2001)
ODC FEP ADSC
(IC2001) (IC5201) (IC2001)
ODC FEP ADSC
(IC2001) (IC5201) (IC2001)
Note
Defect 4
servo drive
servo drive
servo drive
ODC
(IC2001)