Dodge DURANGO 2017 Owner's Manual page 420

418 STARTING AND OPERATING
Partial Off
The "Partial Off" mode is intended for times when a more
spirited driving experience is desired. This mode may
modify TCS and ESC thresholds for activation, which
allows for more wheel spin than normally allowed. This
mode may be useful if the vehicle becomes stuck.
To enter the "Partial Off" mode, momentarily push the
"ESC Off" switch and the "ESC Off Indicator Light" will
illuminate. To turn the ESC on again, momentarily push
the "ESC Off" switch and the "ESC Off Indicator Light"
will turn off.
NOTE: For vehicles with multiple partial ESC modes a
momentary button push will toggle the ESC mode. Mul-
tiple momentary button pushed may be required to return
to ESC On.
NOTE:
• When in "Partial Off" mode, the TCS functionality of
ESC, (except for the limited slip feature described in the
TCS section), has been disabled and the "ESC Off
Indicator Light" will be illuminated. When in "Partial
Off" mode, the engine power reduction feature of TCS is
disabled, and the enhanced vehicle stability offered by
the ESC system is reduced.
• Trailer Sway control (TSC) is disabled when the ESC
system is in the "Partial Off" mode.
ESC Activation/Malfunction Indicator Light and ESC
OFF Indicator Light
The "ESC Activation/Malfunction Indicator Light"
in the instrument cluster will come on when the
ignition switch is turned to the ON position. It
should go out with the engine running. If the "ESC
Activation/Malfunction Indicator Light" comes on continu-
ously with the engine running, a malfunction has been de-
tected in the ESC system. If this light remains on after several
ignition cycles, and the vehicle has been driven several miles
(kilometers) at speeds greater than 30 mph (48 km/h), see
your authorized dealer as soon as possible to have the
problem diagnosed and corrected.
The "ESC Activation/Malfunction Indicator Light" (located in
the instrument cluster) starts to flash as soon as the tires lose
traction and the ESC system becomes active. The "ESC
Activation/Malfunction Indicator Light" also flashes when
TCS is active. If the "ESC Activation/Malfunction Indicator
Light" begins to flash during acceleration, ease up on the
accelerator and apply as little throttle as possible. Be sure to
adapt your speed and driving to the prevailing road condi-
tions.