Change The Password - Philips DVP3850K User Manual

Setup
Note
• To play a DVD disc that has a rating level higher than your setting, enter the password first. (Refer to
"Setup" > "General setup" > "Play a locked disc" for details)
•
The rating levels are country-dependent. To allow all discs to be played, select
•
Some discs have ratings printed on but are not recorded with ratings. This function has no effect on such
discs.
[PBC] - Enable or disable the PBC (playback control) feature.
[Password] - Change the password for playing discs that are locked or restricted with rating levels.
Note
• If you forget the password, enter "136900" before you set a new password.

Change the password

1
Select [Preference] > [Password] > [Change], and then press OK.
»
The interface for changing password is displayed.
2
Press OK again.
»
"0" is displayed behind
3
Press / to set a value (0-9) to the first digit.
4
Press .
5
Repeat steps 3 and 4 to enter the 6-digit old password.
6
Repeat steps 3 and 4 to enter the new password behind [New Password].
7
Repeat steps 3 and 4 to enter the new password behind [Confirm PWD].
[DivX Subtitle] - Select a character set that supports the subtitle of your DivX video.
[Version Info] - Display the information about software version of this player.
[Default] - Reset all settings to factory default, except for the settings for [Disc Lock], [Parental
Control], and [Password].
20 EN
[Old Password] as the first digit of old password.
[8 Adult].