Baby Trend HC38A Instruction Manual page 5

ASSEMBLY
TO ATTACH TRAY
WARNING:
Always
check that the high chair is
locked in the open position
before using.
WARNING:
The tray is
not designed to hold the child
in the chair. The child should be
secured in the high chair at all
times by the 5-point restraining
system, either in the reclining,
semi-reclining or upright
position.
6) • To attach the Tray, line up the Grooves
on the bottom of the Tray with the
armrests of the high chair. Squeeze the
front release handle and slide the Tray
onto the armrests (Fig. 6a). The Tray
has a 3-position adjustment. To adjust
the position, squeeze the front release
handle located underneath the Tray and
reposition the Tray to the desired position.
Release the Tray's handle. Make sure the
Tray is securely locked in its new position
before use.
ATTENTION:
Never leave the tray in a position where the
warning signs are visible (Fig. 6b).
7
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ATTACH INSERT TRAY
7) • The dishwasher safe Tray Insert snaps
Release Handle
Groove
Fig. 6a
Fig. 6b
onto the High Chair Tray and is held in
place by tabs on the sides of the Tray.
When installing the Tray Insert make
sure that it snaps into place to prevent
the child from removing the Tray Insert.
To remove Insert unsnap tabs from the
Tray (Fig. 7a).
• The Tray may be stored on the back
legs of the High Chair. Align the holes in
the rear of the tray with the small pegs
on the back legs (Fig. 7b).
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 7a
Fig. 7b
8