Philips DVP3360 User Manual page 28

[ Analogue Output ]
Select the analogue audio setting based on
the audio device that is connected through
the analogue audio socket.
• [ Stereo ] – for stereo output.
• [ LT/RT ] – for surround sound output
through two speakers.
[ Digital Audio ]
Select the setting based on the digital
ampliÀ er/receiver that is connected
through the digital socket.
• [ Digital Output ]
digital output.
Option
[ Off ]
[ All ]
[ PCM Only ]
• [ LPCM Output ]
(Linear Pulse Code Modulation) output
sampling rate.
Option
[ 48kHz ]
[ 96kHz ]
28 EN
– select the type of
Description
Disable digital output.
The device supports
multi-channel audio
formats.
The device is not capable
of decoding multi-channel
audio. Audio is
downmixed to two-
[
channel sound: see
LPCM Output ]
setting.
– select the LPCM
Description
For discs recorded at
sampling rate of 48 kHz.
For discs recorded at the
sampling rate of 96 kHz.
Note
•
[ Digital Audio ] setting is only available if the
[ HDMI Audio ] is set to [ Off ].
•
[ LPCM Output ] setting is only available if the
[ Digital Output ] is set to [ PCM only ].
•
The higher the sampling rate, the better the sound
quality.
[ HDMI Audio ]
Select the audio output setting when you
connect this DVD player and the TV with
a HDMI cable.
• [ On ] – audio output through the TV.
• [ Off ] – disable audio output from the
TV.
[ Audio Sync ]
Set the default delay time for audio output
when you play a video disc.
1. Press OK.
b B to set the delay time.
2. Press
3. Press OK to conÀ rm and exit.
[ Volume ]
Set the default volume level when you play
a disc.
1. Press OK.
b B to set the volume.
2. Press
3. Press OK to conÀ rm and exit.