Connect to analog stereo system
1
Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
device.
Tip
•
You can optimize the audio output (see chapter
'Adjust settings' - [ Audio Setup ] > [ Analog Output
]) for details.
AUDIO IN
Connect USB device
1
Connect the USB Á ash drive to the
(USB) jack on this DVD player.
Note
•
This DVD player can only play/view MP3, WMA,
DivX or JPEG À les that are stored on such devices.
•
Press
to access the content and play the À les.
Connect to power outlet
Warning
•
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player
1
Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
EN
11