Using The Audio Setup Menu; Front / Center / Surround Speakers - Philips DVP3126/98 User Manual

DVD Menu Options

Using the Audio setup menu

A
Press SETUP on the remote control.
The system setup menu appears.
Language
Front Speakers Aspect Ratio
Language
View Mode Center Speaker
Video Video
Surround Speakers TV System
Video Out Subwoofer
Audio Audio Digital Output Smart Picture
Night Mode
Down Sampling
Rating
Rating
Misc Misc
B
Press to select { Audio }, then
press .
C
Press to select an item, then press
to access.
Example: { Night Mode }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D
Use to select a setting and press
OK to confi rm.
Example: { On }
The setting is selected and setup is
complete.
E
To exit, press SETUP.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
32
01-43_dvp3126_98_eng1.indd 32 01-43_dvp3126_98_eng1.indd 32
(continued)

Front / Center / Surround Speakers

You can adjust the volume level setting
for individual speakers.
A
In 'Audio', press
Speakers }, { Center Speaker } or
{ Surround Speakers }, then press
{ Large }
: : 4:3 Large
: : Auto Fit None
When connected speakers (except for
: NC : None
subwoofer) can produce low frequency
:None
:
signals below 120Hz.
: Personal
: All
:Off
:On
{ Small }
When connected speakers (except for
subwoofer) can not produce low
frequency signals below 120Hz.
{ None }
No sound output from the speakers.
Only applicable for center and rear
speakers.
B
Use
OK to confi rm.
to select { Front
The range from 20Hz to 20KHz
The range from 120Hz to 20KHz
to select a setting and press
.
2007-02-12 1:24:32 PM 2007-02-12 1:24:32 PM