Digital Audio; Using The Video Setup Menu - Philips DVP3120/12 User Manual

Dvd video player
Hide thumbs Also See for DVP3120/12:
Table of Contents

Advertisement

DVD Menu Options
Digital Output
Set the Digital Output according to your
optional audio equipment connection.
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{ PCM Only }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{ SPDIF Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
LPCM Output
If you connect the DVD player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
{ 48K }
Playback a disc recorded at the sampling
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Tip:
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
30
01-39_dvp3120_12_eng1.indd 30
01-39_dvp3120_12_eng1.indd 30
(continued)

Using the Video setup menu

A
Press SETUP on the remote control.
The system setup menu appears.
General
- - Video Setup Page - -
TY Type
TV Display
Progressive
Sharpness
Brightness
Contrast
Color
Component
B
Press
to select { Video Setup
Page }.
C
Press
to select an item, then press
to access.
Example: { TV Type }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D
Use
to select a setting and press
OK to confi rm.
Example: { PAL }
The setting is selected and setup is
complete.
E
To exit, press SETUP.
Audio
Video
Preference
2007-01-15 4:17:16 PM
2007-01-15 4:17:16 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp3120

Table of Contents