Get Started; Prepare The Remote Control; Find The Correct Viewing Channel; Select Menu Display Language - Philips DVP3111/51 User Manual

4 Get started

Prepare the remote control

1
Open the battery compartment.
2
Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Remove batteries if they are exhausted or if
the remote control is not to be used for a long
time.
•
Do not mix batteries (old and new or carbon
and alkaline, etc.).
•
Batteries contain chemical substances, so they
should be disposed of properly.
Find the correct viewing
channel
1
Press to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user
manual on how to select the correct
channel.)

Select menu display language

1
Press SETUP .
» [General Setup] menu is displayed.
2
Select [OSD language] , then press .
10 EN
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
• The language options may vary from
different regions.
3
Press to select a language, then press
OK .

Turn on progressive scan

Note
•
To use the progressive scan feature, you
must connect a progressive scan TV with the
component video jacks (see "Connect" >
"Connect video cables" > "Option 1: Connect
to the component video jacks" for details).
Video Setup
TV System
TV Display
Progressive
Picture Setting
1
Turn on the TV to the correct viewing
channel for this product.
2
Press SETUP .
3
to select [Video Setup] .
Press
4
Select [Progressive] > [On] , then press
OK .
English
Melayu
On
Off