1
Connect the AC power cable to the wall
socket.
»
The player is ready to be set up for use.
4 Get started
Prepare the remote control
1
Open the battery compartment.
2
Insert two R03 or AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Remove batteries if they are exhausted or if the remote
control is not to be used for a long time.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.
Find the correct viewing channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user manual
on how to select the correct channel.)
Select menu display language
1
Press SETUP.
» [General Setup] menu is displayed.
2
Select [OSD Language], then press .
8
EN
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
•
The language options may vary from
different regions.
3
Press
to select a language, then press OK.
5 Play
Play a disc
Caution
•
Do not place any objects other than discs into the disc
compartment.
•
Do not touch the disc optical lens inside the disc
compartment.
1
Press
to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press
to close the disc compartment and
start disc play.
•
To view disc play, turn on the TV to the
correct viewing channel for this product.
•
To stop disc play, press
Note
•
Check the types of discs supported (see "Specifi cations"
> "Play media").
•
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preferences" > [Parental
Control]).
•
If you pause or stop a disc, the screen saver appears after
5 minutes of inactivity. To deactivate the screen saver,
press DISC MENU.
•
After you pause or stop a disc and no button is pressed
within 15 minutes, this product automatically switches
to standby.
English
Melayu
.