Page 1
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No. 769-07688...
Choose from the options below: ◊ Visit us on the web at www.mtdproducts.com ◊ Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683 ◊ Write us at MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...
Important Safe Operation Practices WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
General Service Use slow speed. Choose a low enough speed setting so that you will not have to stop or shift while on the slope. Before cleaning, repairing, or inspecting, make certain the Tires may lose traction on slopes even though the brakes blade(s) and all moving parts have stopped.
Contents of Carton Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below and shown in Fig. 3-1. Hardware part numbers are shown in parentheses. • Two Grass Bag Assemblies •...
CONTENTS OF HARDWARE PACK This grass collector kit is shipped with a hardware pack enclosed. Please check your hardware packs against the illustrations below. The quantities for each item is listed in parenthesis. Hardware Pack 689-00210 736-0159 710-3015 712-04063 720-04061 712-04150 710-3195 3 —...
Assembly & Installation Installing the Bagger Assembly Install the grass-bag mounting assembly onto the bagger mounting bracket by lowering it down (1) and fitting the To Install the bagger mounting bracket, follow these steps: assembly into the slot provided in the mounting bracket. See the Inset in Fig.
Page 9
Install the bags onto the mounting frame as shown in Fig. Once the chute tube is locked, the wing-knob hole will be 5-2 in the Operation section. Simply place the leading aligned. Secure the chute tube to the tractor by installing edge of the bag onto the front frame rail, then rock the bag the wing-knob, and hand-tightening it.
Operation Bagger Usage Empty the grass clippings at a proper disposal site. Holding the bag firmly, turn upside down, and empty the contents. NOTE: When both grass bags are full, place the tractor on a firm, To reinstall the grass bags, insert the leading edge onto the level surface, disengage the PTO, turn the tractor engine off and bagger mount assembly (1 in Fig.
MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with b. Routine maintenance items such as lubricants, filters, blade respect to new merchandise purchased and used in the United States sharpening, tune-ups, brake adjustments, clutch adjustments,...