Troubleshooting; Specifications - Sony MP-CL1 Startup Manual

Troubleshooting

The power does not turn on.
• If the remaining battery power
is low or insufficient, charge the
battery.
• Use this product in a location
with an ambient temperature of
between 0 °C and 35 °C.
• Try turning the power off and on
again.
This product automatically shuts
down during use.
• The battery may be depleted.
Charge the battery.
• Check that the sleep timer is not
turned on in the [Sleep timer]
menu.
• This product automatically shuts
down when it overheats. Let it
cool down before you operate it
again.
The  (power) and
lamps blink in white and red
respectively at the same time.
• An internal error may have
occurred. Try turning the power
off and on again.
The (charge) lamp blinks in
orange.
• The battery is almost depleted.
Charge the battery.

Specifications

Design and specifications are
subject to change without notice.
Dimensions: Approx. 77.0 mm x
149.5 mm x 13.0 mm (3 3/64 inches
× 5 57/64 inches × 33/64 inches)
(W/H/L)
Weight: Approx. 210 g (7.4 oz.)
Operating temperature: 0 °C to 35
°C (32 °F to 95 °F)
Wi-Fi standards supported
(Indoor use only in India): IEEE
802.11 a/b/g/n (2.4 GHz/5 GHz)
Output resolution: 1,920 × 720
Audio output: Ф3.5 Audio Jack
Speaker output: 1.0 W
HDMI/MHL input: Mini HDMI/MHL
2 (HDCP1.4)
Diagonal projection image size:
40 inches at projection distance of
1.15 m
Brightness: Average: 32 lumens/
Maximum: 37 lumens (100% White)
Color reproducibility: Full color
(16,770,000 colors)
Aspect ratio: 16:9
Contrast ratio: 80,000:1
Continuous projecting time (Full
charge): Approx. 120 minutes
(charge)
Light source/light source life:
Laser diode/Approx. 2,000 hours
Laser class: Class 3R
Wavelength: 445 nm to 639 nm
Beam divergence: 4.5 mrad.
Pulse Frequency: 60 Hz
Output : 206 mW
FOV (horizontal): 42.1°
Input: DC5 V/1.5 A
Li-ion Battery: DC3.8 V/3400 mAh
Charging time: Via AC power
adaptor (not supplied): Approx.
3.3 hours
Via USB Type A port:
Approx. 6.3 hours
Output: DC5 V/1.5 A, 1 port
3