Digital Output 61 - Philips DVDR75 Owner's Manual

After connecting the Recorder to your TV and other equipment, you may
need to change the Recorder's Digital Output setting. Look to see which
Recorder audio jacks you connected to your other equipment, then set
Digital Output accordingly.The information in step 4 will help you decide.
Adjust Digital Output only if you used the Recorder's Coaxial DIGITAL
AUDIO OUT jack. (If you used the white/red OUT AUDIO L/R jacks, set
Digital Output to Off. See page 62 to adjust the sound at Analog Output.)
1
Press SYSTEM MENU. Press ; to select
corner of the menu bar at the top of the TV screen.
2 Press CH-9 repeatedly to select G, then press :.
3
Digital output will be selected. Press :.
4
Press CH+8 or CH-9 to select Off, PCM only, or All, then
press OK.
Select All if you connected the Recorder's Coaxial DIGITAL
AUDIO OUT jack to a Stereo that has a built-in multi-channel
decoder. See page 16.
Select Off if you did not use the Coaxial DIGITAL AUDIO OUT
jack.
Select PCM only if you used the Recorder's Coaxial DIGITAL
AUDIO OUT jack for connections, but your Stereo does not
include a built-in digital multi-channel decoder. PCM represents Pulse
Code Modulation.
W X Y
~
1 2 1en
Digital output
G
Analog output
r Night mode
5
Press SYSTEM MENU to remove the menus.
Z a
off no off
Sound
s Off
PCM only K
L
All
in the top left

Digital Output 61

STANDBY
MONITOR
TV / DVD T / C PLAY MODE REC. MODE
1
2 3
4 5 6
7 8
9
0
DISC SYSTEM
MENU
OK
SELECT
CH
CH
TIMER
FSS TV VOLUME
RETURN CLEAR
PLAY
STOP
I
I
AUDIO PAUSE
REC/OTR
1,5
1-4