Understanding Roaming - Kyocera KOI User Manual

You can call the code even if your phone is locked or
your account is restricted. When you call, your phone
enters
Emergency mode.
service exclusive access to your phone to call you
back, if necessary. To make or receive regular calls
after dialing the code, you must exit this mode.
To exit Emergency mode
When you have completed the emergency call:
Press to select
1.
Press again to confirm your choice.
2.
To determine who has access to your
Note:
location, see "Setting position location" on page 50.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
→
Select
1. Menu Call History
Select a timer:
2.
–
Call History Timer
have made and received since you last reset
this timer. To reset this timer to zero, press
to select
Reset
–
All Calls Timer
made and received. This timer cannot be reset.
–
Kilobyte Counter
data sent and received by the phone. This
counter resets automatically. May not
appear on all phones.
14
This enables the emergency
.
Exit
.
—Tracks all calls you
.
—Tracks all calls you have
—Tracks the kilobytes of
Timing your calls
You can set your phone to beep 10 seconds before
each minute passes when you are on a call.
→
• Select
Menu Settings
→
Minute Alert Enabled
Receiving data or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. For more information, see page 49.

Understanding roaming

Controlling network roaming
Depending on services available from your service
provider, you may set the phone to either digital or
analog mode. This is useful if you are in an area that
borders on digital service and the automatic feature is
causing the phone to keep switching between modes.
→
Select
1. Menu Settings
.
Digital/Analog
Select an option and press
2.
– automatically switches the phone
Automatic
between digital and analog.
– sets the phone to work in
Analog only
analog mode only.
– forces a call into analog mode
Analog call
for the duration of the next call.
– sets the phone to work in digital
Digital only
mode only.
Making and Answering Calls
→ →
Sounds
.
→ →
Network
.