Philips PD7001B User Manual page 20

No power
•
Ensure that both plugs of the mains cord are properly connected.
•
Ensure that there is power at the AC outlet.
•
Check if the built-in battery is drained.
No sound
•
Ensure that the AV cable is connected correctly.
No response to the remote control
•
Ensure that the path between the remote control and the player is clear from
obstacles.
•
From a close distance, point the remote control directly at the player.
• Replace the remote control batteries.
•
The function does not work for this disc. Refer to the disc instructions.
Distorted picture
•
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc outwards from the
center.
•
Make sure that the video output format of the disc is compatible with the TV.
• Change the video output format to match your TV or program.
•
The LCD is manufactured using high precision technology. You may, however, see
tiny black points and/or bright points(red, blue, green) that continuously appear
on the LCD. This is a normal result of the manufacturing process and does not
indicate a malfunction.
Cannot play disc
• Ensure the disc label is upwards.
•
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc outwards from the
center.
•
Check if the disc is defective by trying another disc.
No response to operating commands
•
The operation is not permitted by the disc.
Not work properly or freeze up
• Press RESET with a ball-point pen or similar tool to switch off the player, and press
to restart.
The player feels warm
•
When the player is in use for a long period of time, its surface will be heated. This
is normal.
No/weak signal displayed on the screen
•
TV signal is too weak or out of TV signal covering area.
•
Make sure you are in an area with sufficient coverage.
EN
18