Table of Contents
Advertisement
26 PREPARATION
Changing the 4-digit code
1
When disc playback is stopped, select ACCESS CONTROL in the
Features menu using the w/v keys.
2
Enter the old code.
3
Move to CHANGE CODE using the w key.
4
Press the u key.
5
Enter the new 4-digit code.
6
Enter the code a second time and reconfirm by pressing OK.
7
Press t to exit the menu.
Note: If you forget your 4 digit code, it can be cancelled by pressing 9 four
times in the 'Access Control' dialog.You can then enter a new code (twice!) as
described above.
Parental Control Disclaimer
"This DVD player features the PARENTAL CONTROL system which is
intended to activate when playing DVD discs furnished with certain
software coding made.This is according to technical standards adopted
by the set maker and disc content industries.
Please note that the PARENTAL CONTROL system will not activate to
the extent a DVD disc is not furnished with the appropriate software
coding. Also note that at the time of release of this DVD player, certain
aspects of the said technical standards had not been fully settled among
set maker and the disc content industries.
On this basis Philips cannot warrant functioning of the PARENTAL
CONTROL system and disclaims any liability of unintended watching of
disc contend.
If in doubt, please check system functioning with the disc before you
allow children access or apply to the relevant disc publisher."
Advertisement
Table of Contents
