Changing The Pronto Settings - Philips TSU9800 Starter Manual

TSU9800 Starter's Guide
Turning the Control Panel On/Off
Tip Always switch off the Control Panel during transport to avoid the activation of the touchscreen and
battery draining.

Changing the Pronto Settings

Tip Your installer might have blocked the access to the Settings pages.
Normally, your installer has fully programmed your Control Panel and no changes are required.
To open the Settings pages:
• Press and hold the Settings icon
General
The General volume
refers to all sounds
you hear when you
operate the Control
Panel.
Tip Press and hold the '-' and '+' buttons to decrease or increase the setting faster.
6
Power switch
The power switch on the
bottom of the Control
Panel turns the Control
Panel on and off.
for more than 3 seconds.
On the Info Page you can find the version and
network information and memory status.
The Button volume
specifically refers to
the default sound you
hear when you press
a button.
To access the other Settings pages:
• Tap the different tabs.
To change Date & Time settings:
1 Tap the Month, Day, Year, or Time
button.
The button is highlighted.
2 Tap the '-' and '+' buttons to
adjust the date or time.
To change the Volume settings:
• Tap the '-' and '+' buttons to
adjust the volume settings.