Samsung NP-X360 User Manual page 107

5
Select Direct Connection and click the Next button.
6
Select the LAN device, setup the IP address and
click the Next button.
IP Settings
To use a static IP address, fill in the fields. For the IP
address information, ask your network administrator.
Obtain an IP address automatically
Select DHCP to use this option (automatic IP setting).
Select Device
Select a device to be connected
to the Internet. Select either Wired
LAN or Wireless LAN.
7
Click Add Printer and set up a printer according to
the wizard.
When the printer has been added, click the Refresh
button, select the newly added printer and then click
the Finish button.
To not add a printer, click the Finish button.
8
When the network settings are complete, the Do you
want to move to the newly added location now?
message appears. Click the Cancel button.
An icon for the added location is created. The
network settings have been completed.
If you select OK, the network settings for the added
location are applied.
To add a new location, repeat the procedures from Step
3 above.
106