Table of Contents
Advertisement
WARNINGS
Install the head restraint properly to
help minimize the risk of neck injury
in the event of a crash.
Note: Adjust the seat backrest to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
Front seat head restraint
E138642
Rear seat outboard head restraints
E138643
Fiesta (CCT) Canada/United States of America, HE8J 19A321 AA enUSA, Edition date: 201607, First Printing
Seats
Rear seat center head restraint
E138645
The head restraints consist of:
A
Energy absorbing head restraint.
B
Steel stems.
C
Guide sleeve adjust and unlock
button.
D
Guide sleeve unlock and remove
button.
E
Tilt button.
Adjusting the Head Restraint
Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
1.
Press and hold button C.
2. Push the head restraint down.
Folding the Head Restraint
1.
Press and hold button E.
2. Pull the head restraint back up to reset.
Removing the Head Restraint
1.
Pull the head restraint up until it
reaches its highest position.
2. Press and hold buttons C and D.
3. Pull the head restraint up.
103
Advertisement
Table of Contents
Troubleshooting
