Table of Contents
Advertisement
Playing a Super VCD/VCD/CD disc
20
Special VCD - features
Zoom
¶ Press the ZOOM key on the remote control to get the picture enlarge
twice than the original size. Press ZOOM again to get a four time in size
enlarge. Use the 341 2 key to view the available zoom picture.
¶ Press the ZOOM key the third time to return to the original size.
Changing subtitles
¶ If the disc is recorded with multi-subtitle tracks, you can select your
preferred subtitle by pressing the SUBTITLE key on your remote
control.
¶ When a DVD disc formatted with multi-subtitle is loaded, you can see
the information in OSD bar on the screen.
OSD - On Screen Display
¶ This function will provide some information about your disc on the
screen. Press OSD key to activate it.
NOTE:
– Some display information, such as REPEAT,PREV/NEXT,PAUSE, will not be
display when OSD ON, but this won't affect their functionality.
– To display the features on the screen, press the OSD key.
Resume
¶ In PBC OFF mode, you can resume playback from the point at which
you stopped, also when the On-Screen-display of "Stop (Play to
resume)".
¶ Press the PLAY key to resume the playback from the stop point.
FTS - Favourite Track Selection (SVCD, VCD,
CD)
¶ This function enables you to store your favourite tracks in certain order.
¶ You can do the following steps to edit the playing orders.
1
Press the PROGRAM key to enter to submenu. (as shown)
2
In the submenu, you need to input your favourite titles by pressing the
NUMBER key. If the number is unavailable, it will disappear from the
submenu.
3
Use the 34 keys to move to next line and repeat the above steps until
you complete the editing of the program.
4
Use the 34 keys to highlight the PLAY PROGRAM and press SELECT
key to confirm.
¶ You can do the following steps to cancel the program.
1
Use the 34 keys to move to the item you wish to remove.
2
Press the CANCEL key, the selected item will be cancelled.
3
If you want to clear all programs, you can use the 34 keys to highlight
the CLEAR ALL item and press the SELECT key to confirm.
¶ You can do the following steps to quit the PROGRAM menu.
1
Press the STOP key twice.
2
Use the 341 2 keys to move to the CANCEL and press the SELECT
key to confirm.
Advertisement
Table of Contents
