Table of Contents
Advertisement
Sound
–
Digital Audio Output
Each DVD disc has a variety of audio output options. Set
the player's Digital Audio Output according to the type of
audio system you use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/ PCM" if
you connected the DVD Player's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipment
with a Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected the
DVD Player's DIGITAL OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder or
MPEG decoder.
PCM: Select "PCM" if you connected the DVD Player's
DIGITAL OUT jack to an amplifier or other equipment with
linear PCM only (or Mini Disc (MD) recorder or Digital
Audio Tape (DAT) deck).
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
–
Sample Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is made, this
unit will automatically convert any 96KHz signals to 48KHz
so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz
signals, select 96KHz. When this choice is made, this unit will
pass each type of signal through without any further
processing.
Language
–
Language (Disc Audio, Disc Subtitle and Disc
Menu)
Select a language for the disc's Menu, Audio and Subtitle.
Audio language and Subtitle language also can be adapted
using the Menu bar. Press the 3/4 buttons to select an
item, then press the 1/2 buttons to choose a setting in the
On-Screen Display (menu bar).
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
P
14
REPARATION
DOLBY
/PCM
DIGITAL
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz
Original
English
French
German
Spanish
Italian
Chinese
Polish
Hungarian
Russian
Other — — — —
–
Menu Language
Select the language for the DVD Player's Menu. This is the
menu you see when you press the SYSTEM MENU button.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Others
–
Dynamic Range (DRC)
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However, you
may wish to compress the dynamic range of the audio
output (the difference between the loudest sounds and the
quietest ones). Then, you may listen to a movie at a lower
volume without losing dialog intelligibility. Set DRC to On
for this effect.
– PBC
Set Playback Control (PBC) to On or Off.
- On: Video CDs with PBC are played according to the
PBC.
- Off: Video CDs with PBC are played the same way as
Audio CDs.
–
Vocal
Set Vocal to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc will mix into a
normal stereo sound.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
English
Spanish
French
DRC Off
Vocal On
PBC On
Advertisement
Table of Contents
