Table of Contents
Advertisement
Subwoofer frequency
Enables you to select Subwoofer
frequency output between 120Hz {LOW}
and 200Hz {HIGH}.
SACD Direct
Enables you (with a suitable speaker
system where the satelite speaker has
sufficient bass response to 40Hz) to
bypass the bass management system for
multi-channel SACD playback. This helps
to preserve maximum sound quality of
your SACD.
➜
On – Select this to enjoy pure SACD
quality.
➜
Off – When set to OFF, the speaker
settings will applied during multi-channel
SACD playback (see page 21).
Plug and Play
This feature is available for automatic
audio selection only when HDMI devices
is connected and recognised.
➜
On – Once the HDMI devices is
recognised by the Player, the Analog audio
and video output is muted.
➜
Off – To disable Plug and Play mode.
PCM Output
Allows you to select PCM digital output
between 48kHz and 96kHz.
➜
48kHz – A 96kHz PCM data disc will
be converted to 48kHz.
➜
96kHz – 96kHz PCM audio on non-
copy protected DVD discs will be played
back at 96kHz. For copy protected discs,
the digital output will be downsampled to
48kHz.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-41 DVP900_00A1
DVD Menu Options
Speakers (Advance Bass
Management)
This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 21.
Features
PBC (Playback Control)
Playback Control feature (only for VCD
2.0) can be set to {ON or OFF}.
If 'ON' is selected, the disc menu (if
available on the disc) will appear on the
TV.
Sleep Timer
Sleep timer turns this DVD Player to
standby mode when playback is stopped
for 20 minutes.
➜
On – DVD Player will go to standby
after a pre-defined time.
➜
Off – Select this to disable the {SLEEP
TIMER}.
SYSTEM MENU
35
Features
Access
Setup
PBC
Sleeptimer
Use ← or → to select other options, ↓ to enter the submenu,
RETURN to leave the menu.
.
/00_3139 246 13872
15/09/2004, 10:01 AM
35
Advertisement
Table of Contents
