Set Bluetooth Pin Code; Send Photos Via Bluetooth Connection By Your Mobile Phone - Philips SPF5008 Quick Start Manual

Set Bluetooth pin code

To keep security, you can set a pin code (from 1 to
16 digits) on the PhotoFrame. The default pin code
is 0000.
1
In the home screen, select [Settings] and then
tap OK to confi rm.
2
Select [Bluetooth] , and then tap OK to
confi rm.
3
Select [Security] , and then tap OK to confi rm.
4
Select [Pin Code] , and then tap OK to
confi rm.
A key pad is displayed.
»
5
Select a number, and then tap OK to confi rm.
6
Repeat Step 5 until the pin code is complete.
7
Select [Enter] , and then tap OK to confi rm.
8
To set the pin code on, select [Pin Code On]
and then tap OK to confi rm.
•
To set the pin code off, select
Off] and then tap OK to confi rm.
Send photos via Bluetooth
connection by your mobile
phone
Note
•
Ensure that
phone is enabled.
•
Ensure that
PhotoFrame is enabled.
•
Detailed operation procedure may vary based on
different mobile phones.
On your mobile phone:
1
Select photos to be sent to the PhotoFrame.
2
Select [Send] > [Bluetooth], and then confi rm
the selection.
»
3
If a pin code is required, enter the pin code
(0000 by default ) of the PhotoFrame.
4
Select [Send], and then confi rm the selection.
»
[Pin Code
Bluetooth connection on your mobile
Bluetooth connection on your
Your Philips PhotoFrame is searched.
Selected photos are sent to and saved in
the Bluetooth album on the PhotoFrame.