Radius Coa And Disconnect Message Attributes; Subscriber Host Identification Attributes; Table 76: Coa And Disconnect Message: Subscriber Host Identification Attributes - Alcatel-Lucent 7750 Reference Manual

RADIUS CoA and Disconnect Message Attributes

Subscriber Host Identification Attributes

Table 76
identify one or multiple subscriber host(s).

Table 76: CoA and Disconnect Message: Subscriber Host Identification Attributes

# (priority) Attribute
ID
1 87
NAS-Port-Id +
single address/
prefix attribute
26-6527-99
(1)
97
123
2 44
3 26-6527-11
(1) To target a subscriber host in a retail service it is mandatory to include the [26-6527-17] Alc-
(2) Although a single host is identified, the CoA or Disconnect Message will apply to all hosts of a
(3) Maximum 32 hosts can be targeted in a single CoA or Disconnect Message. When more than 32
7750 SR RADIUS Attributes Reference Guide
details the different attributes that can be used in a CoA and Disconnect Message to
Attribute Name
NAS-Port-Id
8 Framed-IP-Address
Alc-Ipv6-Address
Framed-Ipv6-Prefix
Delegated-Ipv6-
Prefix
Acct-Session-Id
(number format)
Alc-Subsc-ID-Str
Retail-Serv-Id attribute. Omitting this attribute results in a CoA NAK with [101] Error-Cause
attribute value 503 (Session Context Not Found).
dual stack PPPoE session or IPoE session (if enabled).
hosts are identified, the CoA and Disconnect Message is rejected with [101] Error-Cause attri-
bute value 501 (Administratively Prohibited).
Notes
+ IP address/prefix
Single host
+ [87] NAS-Port-Id
Single IPv4 host
+ [87] NAS-Port-Id
Single IPv6 host (IA_NA)
+ [87] NAS-Port-Id
Single IPv6 host (SLAAC)
+ [87] NAS-Port-Id
Single IPv6 host (IA_PD)
Host acct-session-id
Single host
Queue instance acct- All hosts attached to this sla-profile
session-id
instance
HSMDAv2: all hosts of the
corresponding subscriber
Session acct-session- All hosts of the dual stack PPPoE or
id IPoE session
All hosts of the corresponding
subscriber
RADIUS Attributes Reference
Identifies
(2)
(2)
(2)
(3)
(3)
Page 233
(2)
(2)
(2)
(3)