Controls Overview(Fig. B); Getting Started; Prepare The Humidifier - Philips HU4805 User Manual

Controls overview(fig. b)

Power Turn on or turn off
G
button the humidifier.
Set the timer for
H Timer button the humidifier
(1H, 4H, and 8H).
Adjust the fan
speed
Fan speed
I
(AUTO,
button
and
Set the relative
Humidity
J
humidity level (40,
button
50 or 60).
The indicator
blinks when there
Water level
K
is not enough
indication
water in the
reservoir.
(low)
,
(normal),
(high)
.

3 Getting started

Prepare the humidifier

1
Place the humidifier on a flat, stable
surface, about 4 inches (10cm) away
from an inside wall. Make sure the
surface is not sensitive to moisture.
2
Hold by both sides of the upper unit
to lift it up (fig. c).
3
Fill the reservoir with approximately
67 fl. oz/2000ml cold tap water
until water reaches the maximum
water level indication (fig. d).
4
Place the upper unit back onto the
reservoir (fig. e).
Note
•
DO NOT overfill the reservoir.
•
Always empty the reservoir before
refilling with clean, cold tap water. Rinse
the reservoir, wipe clean and dry with a
clean cloth or paper towel. For complete
cleaning instructions, see section 'Clean
your humidifier'.
EN 7