Step 15(C): Add New Security Zone Policy - ADTRAN NetVanta 7100 Configuration Manual

I T SIP S
NTEGRA ELECOM OLUTIONS
IP PBX Configuration Settings, Notes, & Recommendations
Step 15(c): Add New Security Zone Policy — In the "Edit Security Zones" section of the page, select
the hyperlink for the Security Zone identified in Step 15(b) above. Again, in this example, the default
value is "Public". This hyperlink
outlined in red below.
Step 15(d): Add New Security Zone Policy — In the "Configure Policies for Security Zone 'Public'"
section of the "Security Zones > Security Zone 'Public'" page, select the "Add Policy to Zone 'Public'"
button to continue configuration. This is outlined in red below.
Step 15(e): Add New Security Zone Policy — In the "Add New Policy -- Select Policy Type" section of
the page, select "Allow" in the "Policy Type" drop down menu. This is
outlined in red below.
34 of 45