Table of Contents
Advertisement
4 – Installation
Installing a Switch
4.2.6
SANsurfer Management Suite Disk - Windows Installation
To install the SANbox Manager application on Windows from the SANsurfer®
Management Suite Disk, do the following:
1.
Close all programs currently running, and insert the SANsurfer Management
Suite Disk into the management workstation CD-ROM drive. If the
SANsurfer Management Suite start page does not open in your default
browser, do the following:
a.
b.
2.
On the SANsurfer Management Suite start page, choose the SANbox
Switch Software button.
3.
On the SANbox Switch Software page, scroll to the SANbox2 (2Gb) Series
area.
4.
In the Windows column, choose the SANbox Manager link to open the File
Download window.
5.
You have a choice of running the installation file from the CD-ROM or
downloading the installation file to your hard drive. Choose one of the
following:
4-10
Using Windows Explorer, double-click the drive letter which contains
the SANsurfer Management Suite Disk.
Locate and double-click the Start_Here.htm file to open the SANsurfer
Management Suite start page in your default browser.
Open the installation file from the CD-ROM and follow the SANbox
Manager installation instructions.
Specify a location in which to save the
sansurfer_windows_install.exe file, and choose the Save button.
Double-click the saved sansurfer_windows_install.exe file and
follow the SANbox Manager installation instructions.
D
59042-03 A
Advertisement
Table of Contents
