Attaching The - Mitsubishi JT-S2AP-W-NE Installation Manual

Installation procedure (continued)
1. Pass the power cable through
the cord bushing and fi x it to the
base again with the terminal cover
mounting screw.
2. Check that the power cable and wires
8
are not pinched anywhere.
■ Attaching the front cover
NOTE
Prevent scratching on the front cover. Rust
●
may form on the scratched area.
(JT-S2AP only)
1. Fix the ground wire removed in
step to the base again.
3
(JT-S2AP only)
2. Attach the front cover to the base.
① Fit the front cover to the bottom of the
base.
9
② Align the plate inside the front cover with
the slit on the right of the base and mount
the front cover.
Do not push the front cover unless the plate
●
inside it is aligned with the slit on the right of
the base.
Doing so may damage the product.
3. Fix the front cover with the front
cover mounting screw (1).
The screw hole is on the bottom.
●
4. Check that the tab of the front cover
is securely engaged.
Terminal
cover
Cord bushing
Base
①
Base
− 12 −
Screw
Ground wire
Ground wire fi xing screw
②
Slit
Front cover
Tab
Front cover
Front cover mounting
screw
Front cover
Plate