Tv Light; Setting The Clock - Philips Television TV Instruction Manual

L9 1883.1 GB 1/8 15/11/00

TV light

B
Z e /
I.S.
1 2 3
4 5 6
7 8 9
SMART SMART
0
é È
MENU L
OK
a c
P
RADIO
~ π °
¬ ◊
ON/OFF SET RESET
ALARM

Setting the clock

SET CLOCK 17:08
START TIME 07:10
q
MODE
10
13:10 Page 10
The feet and clock of the television set are luminous and backlit.
æ
r
Use the key on the remote control to switch the lighting on and off .
Â
IJ
Use the keys to increase or decrease the intensity of the 3 levels of
lighting.
Note: the lighting controls are independent of the television controls (it may be in
TV, radio or standby mode). However the lighting does not operate when the set is
switched off using the on-off key.
The television set is equipped with an analogue clock on the front of the
set. It is set using the menus.
Automatic reset:
The time is automatically reset, each time the set is switched on, using
teletext information taken from TV programme 1.
• If it does not have teletext, the time will not be updated.
• If the appliance has been disconnected from the mains, the hands on the
clock will move through 360° when switched on.
The television set is equipped with a backup system which stores the time when
the appliance is disconnected from the mains.
To manually set the clock:
æ
Press Ë on the remote control.
SET ALARM
The menu is displayed on the screen.
CLOCK
Â
Press I once to select
SET CLOCK.
ê
Enter the current time using
clock is updated a few seconds later.
®
Press Ë again to exit the menu.
SET ALARM
Changing the time:
For countries which change their clocks twice a year (summer time, winter
time), the clocks are reset automatically using the teletext information
taken from programme 1. However, the time is only updated when the
television set is switched on.
0 9 or K L .The time on the analogue