Philips Television Set & Remote Control Owner's Manual page 16

Front connections
Carry out one of the following connections and then:
Use the
Hi-8 cameras).
For a mono sound camcorder, connect the audio signal to the AUDIO L input.
Use the
the television.
N.B.: If a peripheral is connected to EXT2, it is advisable to switch it off while using
a front S-VHS connection.
Amplifier
Use an audio connection cable and connect the P sockets "L" and "R" on
the set to the "AUDIO IN" "L" and "R" input on your hi-fi amplifier.
Headphones
To adjust the headphones vo l u m e, use the
m e nu (p. 1 0 ) .To adjust the volume on the TV set, use the
You can also access the HEADPHONES adjustment directly using programmable keys
To make a copy of recordings:
Carry out one of the following connections, then:
Press
On the video recorder, select the euroconnector socket as the recording source.
N.B.: Copying is not possible using front connections.
16
key to select
key to reproduce the sound on the left and right loudspeakers of
and on the remote control (see p. 8).
to select .
E1
(for VHS or 8mm cameras) or
E2
HEADPHONES
(S-VHS or
E2 Y/C
adjustment in the
S O U N D
or keys.