Change The Working Mode To Ap - TP-Link RE350 AC1200 Manual

Connect the extender to your router
Power on the extender, and connect it to your router's Ethernet port via an
Ethernet cable.

Change the working mode to AP

Connect your computer to the extender's wireless network.
Launch a web browser and log into http://tplinkrepeater.net, click
Mode on the top right corner, select Access Point and click Save.
The extender will switch to AP mode and reboot automatically.
After rebooting, you may need to reconnect to the extender's network
and log in again.
Customize the SSID and Password (Optional)
Go to Settings > Wireless > Wireless Settings page, customize the
SSID and password of the extender, and click Save.
Network Name (SSID): Customize an easy-to remember SSID for

your AP's wireless network.
Security: Select the security type. WPA/WPA2 - Personal is

recommended.
Connect the Extender to the Internet