Side Panel Features - Hand Held Products Dolphin 7600 Series User Manual

Side Panel Features

Note: This graphic shows the left side of the Dolphin 7600 terminal.
DC Power Jack
The DC power jack receives external power from the Dolphin power cable that comes in the box with the terminal.
When connected to the Dolphin Power Cable, the terminal is powered and the main battery pack is charging.
For more information, about the Dolphin Power Cable, see
Headset Jack
This is a 2.5mm audio jack that supports a headset with a mono speaker and microphone.
IrDA Port
The IrDA (Infrared Data Association) port communicates with IrDA-enabled devices such as PCs, printers,
modems, or other Dolphin 7600 terminals. Maximum data transfer speed is 115 Kbps. You access IrDA
communication functionality in the Bluetooth Manager. For more information, see
6-7.
Side Button
By default, these buttons activate the image/scan engine as a more ergonomic alternative to pressing the SCAN
key on the keyboard. These buttons can be programmed to launch applications from the Desktop. For more
information about programming these buttons, see
Side Door
The rubber door on the left side panel provides access to the Headset and DC power jacks.
When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal's
environmental rating.
Dolphin® 7600 Series User's Guide
DC Power
Side
Jack
Button
Side Door
1/17/2007
Headset
IrDA Port
Jack
Charge the Batteries
Hardware Application Buttons
Rev B
on page 2-1.
Infrared Communication on page
on page 4-2.
3 - 5