Sony HXR-NX5R Operating Manual page 124

Warning indicators and messages (Continued)
Failed to connect to an FTP server.
Connection to the FTP server failed
because the FTP server could not be found
or for other reasons.
Cannot authenticate with WEP.
The password is wrong or automatic
acquisition of an IP address has
failed.
Check the password (WEP key). Check
the DHCP settings of the access point.
Cannot authenticate with WEP.
The password is wrong or the IP
address setting is wrong.
Check the password (WEP key). Check
the IP address setting of the camcorder.
Cannot execute functions.
Restart the camcorder. If the problem
persists, contact a service representative.
Failed to connect to the Ustream
server.
Check the "CLOCK SET".
Check that the camcorder clock is set to
the correct time.
Ustream error occurred.
Try to restart streaming. Check the status
of the USTREAM service.
(http://www.ustream.tv/)
The server rejected the request.
Try to restart streaming. Check the status
of the USTREAM service.
(http://www.ustream.tv/)
Authentication information is invalid.
Check the user name and password.
(NETWORK SET) t
Check
[USTREAM] t [USER INFO SET]
settings.
124
An invalid channel has been
specified.
Specify a valid channel and try to restart
streaming.
Connection to the server terminated.
Check the communication
environment.
Reconnect using a stable communications
environment.
There is a possibility that the movie
was not saved correctly on the
server.
Check whether or not the movie was
saved on the server.
Not enough stream time.
Could not be saved to the server.
Increase the time period for streaming.
Could not verify the certificate.
Continue connection?
Obtain and import a certificate. For details
about importing a certificate, see page 79.
Also, check that the clock setting of the
camcorder is set to the correct date and
time.
Connection to the FTP server
disconnected.
Connection to the FTP server was
disconnected.
Cannot upload to the FTP server.
Connection to the FTP server was
successful, but a file could not be
transferred. Check the transfer destination
directory settings and the settings on the
FTP server.
Unable to access the media.
The memory card could not be loaded.
The memory card may be damaged.