Sony KDL-40R48xB Quick Start Manual page 215

Preparing for the installation
of the TV
1
Detach the Table-Top Stand
from the TV.
Note
 Make sure to place TV on the place where you put a
soft cloth on to prevent damaging display's surface.
 When installing the Wall-Mount Bracket, do not use
the screws removed from the Table-Top Stand.
 Be sure to store the removed Table-top Stand and its
screws in a safe place, keeping them away from
children. You will need them if you want to use the TV
on a table in the future. The Table-Top Stand cannot
be purchased separately.
WARNING
 Be sure the TV is on the vertical position before
switching on. TV set must not powered on with LCD
panel face down to avoid uneven picture uniformity.
 If pressure or shock is applied to the surface of the
TV, the TV may break or become damaged.
 Lay the TV face down on a stable and level surface
with the Table-Top Stand hanging over the edge of
the surface. Having the TV face and the base of the
Table-Top Stand on the same level surface will create
an unstable working condition and can damage the
TV.
 When detaching the Table-Top Stand from the TV,
hold the Table-Top Stand securely with both hands.
2
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
5.
Soft cloth
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
 Be sure to store the unused parts in a safe place for
future use. Retain this manual for future reference.
Standard mounting (2-a)
Screw
(+PSW 6 x 20)

Pulley 
Soft cloth
Slim mounting (2-b)
Note
 You cannot use some of the terminals on the rear of
the TV when using this mounting style.
Screw
(+PSW 6 x 20)

Pulley 
Soft cloth
− 9 (GB) −
Screw
(+PSW 6 x 50)

Spacer
(60 mm) 
GB
Belt 
Screw
(+PSW 6 x 20)

Spacer
(20 mm) 
Belt 