Philips Color TV Directions For Use Manual page 9

AV1 A
5
T
he TV's audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar
device) that has audio/video output jacks.
Follow the easy steps below to connect an
accessory device to the AV 1 Input Jacks
located on the back of the TV.
1
Connect the VIDEO (yellow) cable
to the VIDEO AV1 in jack on the back
of the TV.
2
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
AV1 in jacks on the rear of the TV.
3
Connect the VIDEO (yellow) cable
to the VIDEO OUT jack on the back
of the VCR.
4
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
5
Turn the VCR (accessory device)
and the TV ON.
6
Press the AV button on the remote
control to select the AV1 channel. AV1
will appear in the upper left corner on
the TV screen.
7
With the VCR (or accessory device)
ON and a prerecorded tape (CD,
DVD, etc.) inserted, press the PLAY
button to view the tape on the tele-
vision.
H
ELPFUL
All the AV channels can be selected by
pressing the Channel + or – buttons.
The AV channels can also be added to
the QuadraSurf™ buttons for quick
access.
/V
UDIO IDEO
Audio Cables
(Red & White)
4
Audio/Video Outputs
H
INT
I C
NPUT ONNECTION
1
2
Monitor
AV1
75
out in
VIDEO
L
AUDIO
R
ANTENNA
OUT OUT
VIDEO
R AUDIO L ANTENNA
IN
IN
5
VCR with
6
VOL
9
Back of TV
S-VIDEO
Video Cable
(Yellow)
IN
3
OUT
Back of Typical VCR
7