Honda CRF50F 2005 Service & Repair Manual page 9

Remove the four damper springs.
Remove the four screws and plain washers.
Remove the drive plate assembly and clutch
springs.
Remove the clutch weight stopper ring.
Remove the clutch weight/center ring.
INSPECTION
Clutch lifter beari ng
Turn the inner race of the litter bearing with your
finger.
The bearing should turn smoothly and freely with-
out excessive play.
Also check that the bearing fits tightly in the clutch
outer cover.
Replace the bearing if necessary.
CLUTCH / GEARSHIFT LINKAGE
SCREWS! WASHERS
DRIVE PLATE ASSEMBLY
CllJTCHWEIGHT/CENTER RING
STC)P';"R R)NG
BEARING
9-9