Use Philips Easylink - Philips 32PFL5615D User Manual

Use Philips EasyLink

Enable or disable EasyLink
NonPu blish
Philips EasyLink provides several features that
enable you to control devices that are
connected via HDMI. Connected devices
must support the HDMI-CEC standard, and
must be properly configured for EasyLink to
work.
Note: HDMI-CEC functionality is known by
other names on other brands. Some
examples are Anynet (Samsung), Aquos Link
(Sharp) or BRAVIA Sync (Sony). Not all
brands are fully compatible with Philips
EasyLink.
To enable or disable EasyLink
Note: Do not enable Philips EasyLink if you
do not intend to use it.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [On] or [Off], then press OK.
EasyLink features
NonPu blish
With Philips EasyLink enabled, the following
features are available:
One-touch play
When you play content from a HDMI-CEC
compliant device, the TV switches on from
standby, and switches to the correct source.
One-touch standby
When you connect your TV to a
HDMI-CEC compliant device, pressing
the TV remote control switches the TV and
all connected HDMI devices to standby
mode.
System audio control
When you connect your TV to, for example,
a HDMI-CEC compliant Home Theatre
System (HTS), your TV speakers
automatically mute and audio from the TV
plays through the HTS.
For more information about system audio
control and other types of TV speaker
configurations, see Connect the TV > Use
Philips EasyLink > TV speakers (Page 51).
EN 50
EasyLink Remote Control
EasyLink Remote Control allows you to
control HDMI-CEC compliant devices using
your TV remote control.
To enable EasyLink Remote Control, see
Connect the TV > Use Philips EasyLink >
Enable or disable EasyLink Remote Control
(Page 51).
Pixel Plus Link
Connected Philips EasyLink devices may
apply their own picture quality processing to
a video, before streaming it to the TV. This
may interfere with the image processing of
the TV. Enable Pixel Plus Link to discard
picture quality processing from connected
Philips EasyLink devices.
To enable Pixel Plus Link
1. Press
2. Select [Setup] > [TV settings] >
[EasyLink] > [Pixel Plus link] > [On].
3. Press OK to activate.
Auto subtitle shift
Auto subtitle shift displays subtitles from
Philips EasyLink compliant Home Theatre
Systems over the video image on your TV.
The video image is thus stretched across the
whole of your TV display, without the need
to create a separate subtitle bar at the
bottom of the screen.
To enable auto subtitle shift
1. Press
2. Select [Setup] > [TV settings] >
[EasyLink] > [Auto subtitle shift].
3. Select [On], then press OK to activate.
on
Audio only mode
Audio only mode enables you to play audio
from a connected Philips EasyLink device
through the TV speakers while the TV is in
standby.
Press
connected Philips EasyLink device.
If available, audio only mode is enabled.
Accept the prompt on the TV to enable
audio only mode.

Control the audio playback with the TV
remote control.
.
.
to receive audio from the