How To Use This Guide; Basic Operation - Panasonic KX-T7000 Quick Manual

How to use this guide

Operation
[ Off - Hook ]
[ REDIAL ]
[ Talk ]
[ CO or DSS ]
[ PROG ]
[ 3 3 ]
[ Tel. / Ext. No. ]
Note :
If a Feature requires the handset to be taken Off – Hook, it must be replaced after the Feature has
q
been programmed or used.
If programming requires the switch at the rear of the Telephone to be moved to the 'PROGRAM'
q
position, it must be returned to the 'SET' position after the programming has been completed.
Basic Operation Description
Description
MAKING A CALL
Intercom Calling
( Calling another extension )
Outgoing Call
( Making a call to the Central Office )
RECEIVING A CALL
CO or INTERCOM LED flashes rapidly on Ext.
( With or Without Ringing )
TRANSFERRING A CALL
Transferring a call to another Extension
( Intercom or CO Line )
USING A DSS BUTTON OR DSS CONSOLE
To Transfer a call
( Note:
Your Installer will have to set the transfer mode )
Description
Press SP-Phone or Monitor or Lift the telephone handset
Press the REDIAL button, or the button programmed with the REDIAL function
Action required by the user is shown in brackets
Button programmed to access the External Line (Central Office CO) or an Ext.
Move Program Switch on the rear of the Telephone to 'PROGRAM'
Dial the digits in the brackets ( i.e. Dial 3 twice on the keypad )
Dial an External phone No. or Extension number
( An External phone No. will have to be prefixed with the access code
9 ( Automatic Line Access ) or 81 ~ 86 ( for CO Line Groups 1 ~ 6 )
Key sequence
[ Off - Hook ] [ Ext. No. ]
or
[ Off - Hook ] [ DSS ( DIRECT STATION SELECT )]
[ Off - Hook ] [ CO ]
or
[ Off - Hook ] [ 9 ( for any available CO line ) ]
or
[ Off - Hook ] [ 81 ~ 86 ( for Trunk Groups 1 ~ 6 ) ]
[ Off - Hook ] [ CO
or
( press the flashing LED if the call does not
automatically connect to your Ext. )
[ TRANSFER ] [ Ext. / Tel. No. ]
[ Announce Call - to the Called party ( optional ) ]
[ Replace your handset ( to transfer the call ) ]
( if the called party does not wish to accept the call,
you can return to the calling party by pressing
[ INTERCOM or CO ] )
Manual transfer :
or
Automatic transfer : [ DSS ]
INTERCOM ]
[ TRANSFER ] [ DSS ]
3