Service Mode Table; Dvd Self Diagnostic Function-Error Code - Panasonic DVD-S42PC Service Manual

9.2.

Service Mode Table 1

The service modes can be activated by pressing various button combination on the player and remote control unit.
Player buttons Remote control unit buttons
PAUSE
+
OPEN/CLOSE
PAUSE
QUICK OSD
OPEN/CLOSE
9.3.

DVD Self Diagnostic Function-Error Code

Error Code Error Content
U, H error
U11 Focus error
U15 Unfinalized DVD-R
H01 Tray loading error
H02 Spindle servo error
H03 Traverse servo error
H04 Tracking servo error
H05 Seek error
H06 Power error
H07 Spindle motor
error
DSC related
F500 DSC error
F501 DSC not Ready
F502 DSC Time out error
F503 DSC communication
Failure
F505 DSC Attention error
F506 Invalid media
ODC related
F600 Access failure
management
information caused by
demodulation error
F601 Indeterminate sector ID
requested
F602 Access failure to LEAD-
IN caused
demodulation error
F603 Access failure
KEYDET caused
demodulation error
F610 ODC abnormality
0 Displaying the UHF display F_ _ _
5 Jitter check, tilt adjustment
*Display shows J_xxx/yyy_zz
"yyy" and "zz" shown to the right have nothing to do with the jitter
value. "yyy" is the error counter, while "zz" is the focus drive
value.
Refer to section 11.4. for Optical Pickup Tilt Adjustment
Procedure.
6 Checking the region numbers and broadcast system
7 Checking the program version
9 Lighting Confirmation Function of Display Tube
FUNCTION Checking the laser drive current
PAUSE Writing the laser drive current value after replacing the optical
pickup (do not use for anything other than optical pickup
replacement)
Initializing the DVD player
(restoring factory preset settings)
Additional error explanation
(Spindle servo, DV3.2 (IC8001) SP motor, CLV
servo error)
Cannot switch off the power because of the panel
and system computer communication error
drive
DV3.2 (IC8001) stops in the occurence of servo
error (starup, focus error, etc)
DSC-system computer
(Communication failure caused by idling of DSC)
Similar disposal as F500
Communication error (result
although communication command was sent)
Similar disposal as F500
Disc is flipped over,
incompatible disc
to Operation stopped because navigation data is not
accessible caused by the demodulation defect
Operation stopped caused by the request to
access abnormal ID data
LEAD IN data unreadable
by
to Access failure to CSS data of disc
by
No permission for command execution
Application
Defect 1
Spindle
motor ass'y
Optical
pickup
communication error DV3.2
(IC8001)
Optical
pickup
error occured DV3.2
(IC8001)
Optical
pickup
TOC unreadable, DISC
DV3.2
(IC8001)
DV3.2
(IC8001)
DV3.2
(IC8001)
23
DVD-S42PC / DVD-S422PC
Note
Refer to section 9.3. Self-
Diagnosis Function.
Refer to section 11.4.
Optical Pickup Tilt
Adjustment
Check the IC8651 FLASH
ROM program.
Refer to section 8
Optical Pickup
Replacement Procedure.
Refer to section 9.5.
Initializing the DVD
player.
Defect 2 Defect 3
DV3.2 servo drive
(IC8001)
DV3.2 servo drive
(IC8001)
EEPROM
(IC8611)
DV3.2 servo drive
(IC8001)
DV3.2
(IC8001)
Defect 4