Sharp PC-1500 Applications Manual page 171

All and more about Sharp PC-1500 at http://www.PC-1500.info
SHARP
PROGRAM
T ITLE
BILLING LEDGER AND LIST
PROGRAM NO.
PS- 0- 27
1
[ Outline
I
CE-150 ,CE- 151
and
CTR required
Product numbers, prices, and quantities for each customer are to be en tered every
time you bill. This billing ledger generation also gives you the total of each
product for each customer; and with th is clear picture, you can manage your
billing C · O ntrol more efficiently , 16 digits arc provided for each product number,
up to 6 digits
for each quantity , price, amo unt and up to 10 digits for totul amoun t.
[Operating Guide
I
(Dfrl
CD :
These keys are used
to
make each billing ledger.
A list of the input data is printed o ut.
. Press t hese keys to generate a list o f all products recorded in t he
tape for each customer.
Note
· Make sure that each tape has only one customer.
[ Example
I
1. Dilling ledger (new customer) Customer code '" G- 55''
Prod uct number
''K - 33'' "H
- 66"
Price
2,500
1,000
Quantit y
6
5
Type in the above data according to t he Key Ope ration Procedure shown later.
When "END? (Y/ N)" d isplayed, type in "Y".
Use the loc•
I IT]
keys again to enter the data of another customer.
Aga in, make sure to re place the tape wi t h a new one for t he new customer.
(New customer) Customer code
Product number
Price
Quantity 4
Key-in the above in that order.
"Z- 99"
"K - 33"
2,500
With the display of "END ? (Y/N)", enter "N" and replace the tape with the
costomcr
code "G- 55 ''.
Then type in the following to complete the key
opera tion.
Customer code
"G- 55"
Prod uct number
"H- 66"
Price -
Quantity 6
"J- 77''
3,500
2
A list generation for each transaction in sequence are as shown in the "Printout"
column.
2. When TAPE !NjOUT OK? (Y/ N) ; is displayed, make sure the customer code
is the same as that o f t he tape.
3. For tape saving/load ing, make sure to set the tape to t he head of the
fil l.
Do not sale this PDF!!! - 165-