HP 7470A Interfacing And Programming Manual page 9

)
> Table of C o n t e n t s (Continued)
) Chapter 5: Labeling (Continued)
The User Defined Character Instruction, UC 5-19
Parameter Interaction in Labeling Commands 5-21
) Advanced Programming Tips 5-27
Chapter 6: Digitizing 6-1
) What You'll Learn in This Chapter 6-1
\ HP-GL Instructions Covered 6-1
Terms You Should Understand 6-1
Preparing Your Plotter for Use as a Digitizer 6-2
) The Digitize Point Instruction, DP 6-2
)
The Digitize Clear Instruction, DC 6-3
The Output Digitized Point and Pen Status Instruction, OD 6-3
) Digitizing with the 7470 6-4
) Manual Method 6-4
Monitoring the Status Byte 6-5
HP-IB Interrupts and Polling 6-7
Chapter 7: Obtaining Information From the Plotter 7-1
What You'll Learn in This Chapter 7-1
) HP-GL Instructions Covered 7-1
x Terms You Should Understand 7-1
A Brief Word about Plotter Output 7-2
) Notes for an HP-IB User 7-2
Notes for an RS-232-C User 7-2
Notes for an HP-IL User 7-2
The Output Actual Position and Pen Status
Instruction, OA 7-3
The Output Commanded Position and Pen Status
Instruction, OC 7-4
The Output Error Instruction, OE 7-5
The Output Factors Instruction, OF 7-6
The Output Identification Instruction, 01 7-7
The Output Options Instruction, 0 0 7-7
) The Output Status Instruction, OS 7-8
\ Summary of Output Response Types 7-9
( )
VI TABLE OF CONTENTS
J
Table of C o n t e n t s (Continued)
Chapter 8: Putting the Commands to Work 8-1
What You'll Learn in This Chapter 8-1
Problem 8-2
Solution 8-2
Setup and Scaling 8-2
The Axes and Their Labels 8-3
Adding Color and Emphasis 8-5
Plotting Your Data 8-6
Listing 8-9
Advanced Programming Tips 8-10
Filling and Hatching 8-10
Filling a Bar 8-10
Hatching a Bar 8-12
Filling Segments of Pie Charts 8-13
Chapter 9: HP-IB Interfacing 9-1
What You'll Learn in This Chapter 9-1
HP-IB Implementation on the 7470 9-2
Interface Switches and Controls 9-2
Addressing the Plotter 9-2
Bus Commands ■ 9-4
Reaction to Bus Commands DCL, SDC, and IFC 9-4
Serial and Parallel Polling 9-4
Addressing the 7470 as a Talker or Listener 9-6
Computers with No High Level I/O Statements 9-6
Computer with High Level I/O Statements 9-6
Sending and Receiving Data 9-7
Computer-to-Plotter 9-7
Plotter-to-Computer 910
Chapter 10: RS-232-C/CCITT V.24 Interfacing 10-1
What You'll Learn in This Chapter 10-1
Setting Up Your RS-232-C Plotter: a Checklist 10-2
Plotter Environments 10-2
Using a Plotter Directly Connected to a
Computer Mainframe or Personal Computer 10-2
Using a Plotter in an Environment with a Terminal 10-4
Using the Plotter in a Terminal-only Environment 10-9
Connecting the RS-232-C Interface 10-10
TABLE OF CONTENTS Vll