Advertisement
Disk Handling
s*$
The MV-30 uses 3.5 inch
2DD
dual side double density double track micro type disks
to
store the
System Program, songs you create, and timbre data parameters.
1.
lnserting a disk
With the disk label facing upward and the shutter
(the
metal cover) pointing away from you, hold the disk level
and gently insert
it
into the disk drive until you hear it
click into
place.
*
Be
sure
to insert the disk all the way,
2.
Ejecting a disk
Press
the eject button of the disk drive and the disk will
pop
out.
x
If the disk becomes stuck, do not use force
to
remove
it
this drive indicator is lit!
3.
Disk
write
protection
Floppy
disks
have a
write-protect tab that prevents data
from accidentally being
erased.
To prohibit writing (to protect the disk)
Move
the protect tab
outward (to
the
PROTECT position).
To permit writing (when you wish to write dataf
Move
the protect tab
inward (to
the WRITE
position).
4.
Disk handling
Floppy
disks contain
a
plastic disc coated with magnetic particles. Observe the following
when
handling disks:
-
Never touch
the magnetic surface of a disk
(do
not open
the metal shutter).
-
Do
not use disks in dusty locations.
-
Do
not
subject
disks to
temperature extremes
(eg.
direct sunlight
in an
enclosed vehicle). Recommended
temperature range:1O
to
SO"C.
-
Do
not expose
floppy disks to strong magnetic fields such as those generated by loudspeakers.
Never remove
a disk from the disk drive while
it
is operating (the
drive's
LED
is
lit);
doing so could
result in damage to both the disk and the
drive.
Remove any
disk from the drive before turning the units power on or
off.
All
important
data should be copied onto backup disks. This provides a complete duplicate of the
data, should
the original disks be lost or
damaged.
Affix disk labels firmly. Should the label come loose while a disk is in the drive, it may be difficult
to
remove
the disk.
back side
write
permit
write
prohibit
protect tab
5
a.a
Advertisement
