Ending A Connection; Connecting Directly To An E-Mail Server; Get Help On Connecting - Audiovox Thero User Manual

Chapter 8: Getting Connected

Ending a Connection

To disconnect, do one of the following:
• When connected via dial-up or VPN, tap the Connection icon,
tap End.
• When connected via cradle, detach your device from the cradle.
• When connected via Infrared, move the device away from the other one.

Connecting Directly to an E-mail Server

You can set up a connection to an e-mail server so that you can send and receive e-mail
messages by using a modem or network connection and Inbox on your device.
Note The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP gateway.
You can use multiple e-mail services to receive messages. For each e-mail address you intend to
use, set up and name the e-mail service following the directions below.
To set up an e-mail service:
• In Inbox on your device, tap Services, then New Service. Follow the directions in the New
Service wizard.
For an explanation of a screen, tap
tap Services then Connect. For more information on using the Inbox program, see "Inbox:
Sending and Receiving E-mail Messages" in Chapter 5.

Get Help on Connecting

Additional help and information can be found in the following locations:
• "Inbox: Sending and Receiving E-mail Messages" in Chapter 5.
• Online Help on the device. Tap
Connections.
• ActiveSync
Help menu.
• For troubleshooting information, see the Pocket PC Web site at: http://www.microsoft.com/
mobile/pocketpc.
132
® Help on the computer. In ActiveSync
then Help. When finished, to connect to your e-mail server,
then Help. Tap View, All Installed Help, then Inbox or
® , click Microsoft ActiveSync Help on the
, on your navigation bar and