Table of Contents
Advertisement
Parking Surveillance (Default: Off)
When function is enabled, dashboard camera will automatically switch to Parking
Surveillance if vehicle is stationary for over 10 minutes.
1. Automatically records a 15-second video when motion detected within view range of
camera.
2. Automatically records and locks a 1-minute video when excessive force of impact is
detected by G-sensor.
3. Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or
longer.
Note:
Parking Surveillance requires consistent power supply via vehicle battery. (It is
recommended to use optional DOD DP4 kit equipped with low-voltage protection design to
prevent battery drainage.
Please ensure to enable G-sensor function in setting menu before switch to Parking
Surveillance. (G-sensor sensitivity Default: Medium)
Parking Surveillance will automatically shut down GPS locating, and will resume when
switched to normal recording mode.
ISO Stamp
On/Off
Default: On.
Set Time Zone
Sets the current time zone for GPS time and date calibration. The time zone must be
manually adjusted for daylight savings
Speed Units
Select metric or imperial units.
GPS Logging
On/Off.
Default: On.
Time-Lapse
The time-lapse function is used to create a sped-up video. When set, the camera will record
one frame every 200ms (milliseconds)/500ms/1 second/5 seconds.
Plate Stamp
Imprints a customized set of 8 digits to the recorded video. Add license plates or other
identifying features to watermark your video.
27
Advertisement
Table of Contents
