Set Up A New Powerline Network - Plug And Play - TP-Link TL-PA9020P User Manual

Chapter 2
2 2

Set Up a New Powerline Network - Plug and Play

I want to:
How can I
do that?
Done!
Use two powerline adapters to set up a new powerline network
in my house.
For example, I have a router in my house, but there are not
enough LAN ports to support all my wired devices. I don't want
complex and expensive dedicated cabling. So I bought two
powerline adapters to extend the network via my household
electrical wiring.
1 Connect one of the powerline adapters to an available LAN
port of the router using an Ethernet cable.
2 Plug the powerline adapter into a wall socket.
3 Plug the second powerline adapter into a wall socket where
you want to add Internet access. Wait until the powerline
LED turns on.
. Note: If the Powerilne LED does not turn on, reset each powerline adapter to
its factory default settings. You can refer to
Then redo steps 1 to 3.
4 Connect your wired device, such as computer or game
console, to the powerline adapter using an Ethernet cable.
e
r l i n
w e
P o
Powerline Adapter
1
N
L A
Router
N
W A
Now enjoy the Internet!
Use the Powerline Adapter
How do I reset my powerline
Powerline Adapter
3
2
adapter?.
4
7