Fatal Error Handling - GE RX3i PROFINET User Manual

Chapter 6. Diagnostics

Fatal Error Handling

6.3
Any failures that occur during power-up or firmware update mode are considered fatal errors. This
includes faults detected on non-critical devices such as the USB port. After successful power-up of the
PROFINET Scanner, only catastrophic errors are treated as fatal. When a fatal error occurs, the PROFINET
scanner blinks an error code on its LEDs (refer to Section 2.1.8.1, Fatal Error Codes).
Certain conditions can prevent the module from powering up and becoming operational or entering
firmware update mode:
Problem
Hardware failure
Invalid firmware
Power-up diagnostics/hardware
initializations failures that are considered
fatal
Catastrophic error during operation
60
Indication
•
•
LED Fatal Error blink code
LED Fatal Error blink code
PACSystems* RX3i PROFINET IO-Scanner User Manual
All LEDs off and the module is
unresponsive, or
The STATUS LED is solid Green
and is the only LED that is on.
Action
Return the module to GE
Automation and Controls.
Note the blink code and
contact Customer Service
Note the blink code and
contact Customer Service
GFK-2737F