Downloading Software To The Devices; Adding Third-Party Application To A Device - Bosch DICENTIS Software Manual

DICENTIS
4.2

Downloading software to the devices

–
–
To do this:
1.
2.
3.
Use this procedure to upgrade other hardware components, such as the DCNM APS, as
required.
Notice!
It is not advisable to upgrade the devices at the same time as the DCNM‑APS, because the
DCNM‑APS resets itself during the download process. This will remove power from the
devices, which will cause a firmware upgrade of the devices to fail.
Notice!
Upgrading the devices will stop all current meeting activities, as well as the DICENTIS
services. After upgrading the devices, you will have to restart the services by right-clicking the
DICENTIS Server Console in the Windows taskbar and then clicking "Restart services".
Notice!
In a DICENTIS system with an ARNI, a restart of the services via the Server Console may take
up to 3 minutes. If you want to restart the services, please use the stop services function in
the Server Console, wait for 30 seconds and then use the start services function in the Server
Console.
4.3

Adding third-party application to a device

The APK (Android application package) upload tool is used to add a third‑party Android
application to a multimedia device. Before you can add a third‑party Android application, you
must verify if the application is compatible with the multimedia device.
Caution!
All installed third‑party applications (APKs) will be deleted when firmware is uploaded to a
!
multimedia device.
Notice!
The APK upload tool can not run at the same time as the OMNEO Firmware Upgrade Tool.
Bosch Security Systems B.V.
Factory delivered DICENTIS devices are delivered with diagnostics software and must be
upgraded to the latest software version before they can be used.
All DICENTIS devices must be upgraded after upgrading the System Server Software.
Make sure all devices are correctly connected to the network and fully started.
Right-click the DICENTIS Server Console in the Windows taskbar.
Click Upgrade devices. This will stop the DICENTIS services and start the upgrade
process.
Software Manual
Software installation | en
2017.02 | V1.9 |
25